As your trusted platform service provider, ECA’s application-ready CompactPCI® hardware platform is a pre-integrated and verified CompactPCI® platform for your niche market turnkey solution. This pre-configured system integrates hardware elements to provide a platform on which telecom equipment manufacturers (TEMs) can quickly build telecom applications. Using this standard solution is a much faster, easier way to bring applications to market than the traditional process of selecting hardware elements and integrating the final system with much effort spent on system qualification, compatibility and test cycle.
CompactPCI® 6U CPU Board with Intel® Pentium® M Processor- & Intel®E7501 Chipset-Based Hardware Platform
The MIC-3369A is a highly integrated and cost-effective CompactPCI® single board computer built on the Intel® Pentium® M processor. It is an ideal application blade for integration with products that have high performance and low power consumption as key requirements.
The MIC-3369A has been optimised for the Intel® Pentium® M processor and Intel® E7501 chipset which deliver a compelling 3.2 GB/s bandwidth across a 400 MHz front side bus. The Pentium® M incorporates 32 KB of level 1 cache, 1 MB/2 MB of level 2 advanced transfer cache and up to 3.2 GB/s of bandwidth across dual data rate memory channels. The MIC-3369A supports up to 2 GB of ECC DDR-200 on-board memory.
With performance in mind, the MIC-3369A design makes extensive use of Intel’s latest I/O controller hub technology and provides 64-bit data buses throughput. The on-board dual Gigabit Ethernet controller is connected via a 64-bit/133 MHz PCI-X for maximum sustained packet throughput.
In addition to a full array of industry standard I/O features, including an on-board 2.5” hard disk and two USB ports, the MIC-3369A also provides one 64-bit/66 MHz PMC site for onboard I/O expansion making it flexible enough to meet the most demanding I/O processing needs.
The MIC-3369A can be used in either a system slot or a peripheral slot, making it an ideal choice for applications that require compliance with PICMG® 2.16 Packet Switching Backplane specification for Gigabit speed switched-fabric interconnection between blades. The board is designed in compliance with the PICMG® 2.9 specification to work with remote system and platform management modules. With all these features and inherent hot swap functionality, the MIC-3369A is perfectly matched for mission critical telecom and data communication applications where high availability is essential, such as the 3G wireless infrastructure, VoIP, media gateways, soft switches and triple-play server clusters.
4U-High CompactPCI® Platform with Standard CompactPCI® Power Supply (CT Bus or Rear I/O)
The MIC-3042A comes with a built-in high-quality backplane that provides 64-bit/66 MHz PCI bus speed. The standard configuration includes a PICMG® 2.5 compatible H.110 bus, which is open standard architecture for telecom solutions. Moreover, the MIC-3042A complies with PICMG® 2.16 and can be used as a blade server or a media blade carrier.
Features
MIC-3369A
Supports Intel® Pentium® M 745 processor @ 1.8 GHz/2 MB L2 cache and Pentium® M processor @ 1.6 GHz/1 MB L2 cache
Dual Gigabit Ethernet on board
Up to 2 GB (DDR-200) onboard memory with ECC
One 64-bit/66 MHz PMC expansion slot
Compliant with PICMG 2.16 Packet Switching Backplane Specification
Hot-Swap Specification-compliant(PICMG 2.1)
MIC-3042
Standard 500 W 2+1 hot-swappable/redundant AC or DC CompactPCI power supplies
